EPM3128ATC100-7N
| Parameters | |
|---|---|
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 3000A |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM3128 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 80 |
| Clock Frequency | 129.9MHz |
| Propagation Delay | 7.5 ns |
EPM3128ATC100-7N Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).100-TQFPis the package in which it resides.There are 80 I/Os programmed in it.There is a 100terminations set on devices.This electrical component has a terminal position of 0.It is powered by a voltage of 3.3V volts.It is included in Programmable Logic Devices.As a result, it is packaged as Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended to mount the chip by Surface Mount.This type of FPGA is a part of the MAX? 3000A series.This device can also display [0].The EPM3128shows its related parts.In digital circuits, there are 2500gates, which act as a basic building block.This logic element/block contains 8logic elements.It runs on a voltage of 2.5/3.33.3Vvolts.Initially, the maximum supply voltage (Vsup) is 3.6V.A supply voltage (Vsup) of greater than 3V should be used.Its clock frequency should not exceed 129.9MHz.
EPM3128ATC100-7N Features
100-TQFP package
80 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM3128ATC100-7N Applications
There are a lot of Intel EPM3128ATC100-7N CPLDs applications.
- Digital systems
- Custom state machines
- Preset swapping
- Cross-Matrix Switch
- Handheld digital devices
- TIMERS/COUNTERS
- Bootloaders for FPGAs
- PLC analog input modules
- Portable digital devices
- DDC INTERFACE
