EPM3128ATC144-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 96 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3128ATC144-7 Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the TQFP package.There are 96 I/Os programmed in it.The termination of a device is set to [0].This electrical component has a terminal position of 0.It is powered by a voltage of 3.3V volts.It is included in Programmable Logic Devices.It is packaged in the way of Bulk.It has 144pins programmed.It is also characterized by YES.In digital circuits, there are 2500gates, which act as a basic building block.In order to maintain high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].The electronic part is mounted by Surface Mount.The 144pins are designed into the board.There is a maximum supply voltage of 3.6V.It operates with the minimal supply voltage of 3V.Currently, there are 96 Programmable I/Os available.There can be 166.67MHz frequency achieved.It is recommended that the operating temperature exceeds 0°C.A temperature less than 70°Cshould be used for operation.The program consists of 8 logic blocks (LABs).The maximal frequency should be lower than 192.3MHz.A programmable logic type is categorized as EE PLD.
EPM3128ATC144-7 Features
TQFP package
96 I/Os
144 pin count
144 pins
8 logic blocks (LABs)
EPM3128ATC144-7 Applications
There are a lot of Altera EPM3128ATC144-7 CPLDs applications.
- Configurable Addressing of I/O Boards
- Auxiliary Power Supply Isolated and Non-isolated
- I/O expansion
- Dedicated input registers
- Preset swapping
- Address decoders
- Programmable power management
- Voltage level translation
- ToR/Aggregation/Core Switch and Router
- DMA control
