EPM3128ATI144-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 96 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.4mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3128ATI144-10 Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).You can find it in package [0].It is programmed with 96 I/Os.Terminations of devices are set to [0].QUADis the terminal position of this electrical part.The device is powered by a voltage of 3.3V volts.This part is in the family [0].A chip with 144pins is programmed.If you use this device, you will also find [0].For digital circuits, there are 2500gates. These devices serve as building blocks.Optimal efficiency requires a supply voltage of [0].For data storage, EEPROMis adopted.In this case, it is mounted by Surface Mount.A total of 144pins are provided on this board.A voltage of 3.6V is the maximum supply voltage for this device.The device is designed to operate with a minimal supply voltage of 3VV.A programmable I/O count of 96 has been recorded.There is 125MHz frequency that can be achieved.Operating temperatures should be higher than -40°C.It is recommended that the operating temperature be below 85°C.There are 8logic blocks (LABs) that make up its basic building block.The maximal frequency should be lower than 192.3MHz.A programmable logic type is classified as EE PLD.
EPM3128ATI144-10 Features
TQFP package
96 I/Os
144 pin count
144 pins
8 logic blocks (LABs)
EPM3128ATI144-10 Applications
There are a lot of Altera EPM3128ATI144-10 CPLDs applications.
- Cross-Matrix Switch
- Custom state machines
- Digital designs
- Programmable polarity
- ROM patching
- TIMERS/COUNTERS
- I2C BUS INTERFACE
- Discrete logic functions
- Power automation
- Storage Cards and Storage Racks
