EPM3256AQI208-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 208 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 208 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 158 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 126.6MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 161 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM3256AQI208-10N Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is enclosed in a PQFP package.The device is programmed with 158 I/Os.It is programmed that device terminations will be 208 .QUADis the terminal position of this electrical part.It is powered from a supply voltage of 3.3V.It is included in Programmable Logic Devices.In this chip, the 208pins are programmed.It is also possible to find YESwhen using this device.For digital circuits, there are 5000gates. These devices serve as building blocks.The supply voltage should be maintained at 3.3V for high efficiency.In order to store data, EEPROMis used.Surface Mountis used to mount this electronic component.The pins are [0].In this case, the maximum supply voltage is 3.6V.It is powered by 3Vas its minimum supply voltage.There are a total of 161 Programmable I/Os.The frequency that can be achieved is 125MHz.Operating temperatures should be higher than 0°C.A temperature below 85°Cshould be used as the operating temperature.In total, it contains 16 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.Programmable logic types can be divided into EE PLD.
EPM3256AQI208-10N Features
PQFP package
158 I/Os
208 pin count
208 pins
16 logic blocks (LABs)
EPM3256AQI208-10N Applications
There are a lot of Altera EPM3256AQI208-10N CPLDs applications.
- Digital multiplexers
- Software-driven hardware configuration
- STANDARD SERIAL INTERFACE UART
- Discrete logic functions
- DMA control
- Field programmable gate
- Power up sequencing
- Digital systems
- PULSE WIDTH MODULATION (PWM)
- Battery operated portable devices
