EPM3256ATC144-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 116 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 126.6MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3256ATC144-10 Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].There are 116 I/Os programmed in it.144terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is provided by a supply voltage of 3.3V volts.There is a part in the family [0].Ideally, the chip should be packaged by Bulk.It is programmed with 144 pins.When using this device, YESis also available.As a building block for digital circuits, there are 5000gates.For high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].This device is mounted by Surface Mount.This board has 144 pins.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 3V is required for this device to operate.There are 116 Programmable I/Os.There can be 125MHz frequency achieved.In order to operate properly, the operating temperature should be higher than 0°C.The operating temperature should be lower than 70°C.Its basic building block is composed of 16 logic blocks (LABs).It is recommended that the maximal frequency be lower than 126.6MHz.There are several types of programmable logic that can be categorized as EE PLD.
EPM3256ATC144-10 Features
TQFP package
116 I/Os
144 pin count
144 pins
16 logic blocks (LABs)
EPM3256ATC144-10 Applications
There are a lot of Altera EPM3256ATC144-10 CPLDs applications.
- Synchronous or asynchronous mode
- I/O PORTS (MCU MODULE)
- Multiple Clock Source Selection
- Page register
- Boolean function generators
- Cross-Matrix Switch
- Reset swapping
- INTERRUPT SYSTEM
- State machine design
- Custom state machines
