EPM3256ATC144-7
| Parameters | |
|---|---|
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 116 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 126.6MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
EPM3256ATC144-7 Overview
The mobile phone network has 256 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).TQFPis the package in which it resides.There are 116 I/Os programmed in it.It is programmed that device terminations will be 144 .This electrical component has a terminal position of 0.The power source is powered by 3.3Vvolts.It is a part of the family [0].Bulkis the packaging method.A chip with 144pins is programmed.This device also displays [0].As a building block for digital circuits, there are 5000gates.If high efficiency is desired, the supply voltage should be kept at [0].Data storage is performed using [0].It is mounted by Surface Mount.The device has a pinout of [0].It operates at a maximum supply voltage of 3.6V volts.It operates with the minimal supply voltage of 3V.In total, there are 116programmable I/Os.The frequency that can be achieved is 166.67MHz.The operating temperature should be higher than 0°C.Temperatures should be lower than 70°C when operating.There are 16 logic blocks (LABs) in its basic building block.The maximum frequency should not exceed 126.6MHz.Types of programmable logic are divided into EE PLD.
EPM3256ATC144-7 Features
TQFP package
116 I/Os
144 pin count
144 pins
16 logic blocks (LABs)
EPM3256ATC144-7 Applications
There are a lot of Altera EPM3256ATC144-7 CPLDs applications.
- Page register
- STANDARD SERIAL INTERFACE UART
- PULSE WIDTH MODULATION (PWM)
- I/O expansion
- Address decoders
- Timing control
- Battery operated portable devices
- State machine control
- Storage Cards and Storage Racks
- Field programmable gate
