EPM3256ATC144-7N.
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Weight | 1.319103g |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 126.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 116 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 126.6MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.4mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM3256ATC144-7N. Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The product is contained in a TQFP package.This device has 116 I/O ports programmed into it.It is programmed that device terminations will be 144 .There is a QUADterminal position on the electrical part in question.A voltage of 3.3V is used as the power supply for this device.This part is included in Programmable Logic Devices.Chips are programmed with 144 pins.When using this device, YESis also available.5000gates are devices that serve as building blocks for digital circuits.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.In this case, EEPROMwill be used to store the data.Surface Mountis used to mount this electronic component.The 144pins are designed into the board.A voltage of 3.6V is the maximum supply voltage for this device.The minimal supply voltage is 3V.A frequency of 126.6MHzcan be achieved.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be below 70°C.The system consists of 16 logic blocks (LABs).It is recommended that the maximum frequency is less than 0.Programmable logic types are divided into EE PLD.
EPM3256ATC144-7N. Features
TQFP package
116 I/Os
144 pin count
144 pins
16 logic blocks (LABs)
EPM3256ATC144-7N. Applications
There are a lot of Altera EPM3256ATC144-7N. CPLDs applications.
- INTERRUPT SYSTEM
- Synchronous or asynchronous mode
- Auxiliary Power Supply Isolated and Non-isolated
- Handheld digital devices
- White goods (Washing, Cold, Aircon ,...)
- Storage Cards and Storage Racks
- Programmable power management
- POWER-SAVING MODES
- Power Meter SMPS
- STANDARD SERIAL INTERFACE UART
