EPM3512AFI256-10N
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 208 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 208 |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Published | 1996 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
EPM3512AFI256-10N Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the FBGA package.There are 208 I/Os programmed in it.There are 256 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of BOTTOMand is connected to the ground.It is powered from a supply voltage of 3.3V.It is a part of the family [0].There are 256 pins on the chip.If you use this device, you will also find [0].A digital circuit is built using 10000gates.High efficiency requires the supply voltage to be maintained at [0].For storing data, it is recommended to use [0].In this case, it is mounted by Surface Mount.A total of 256pins are provided on this board.It operates with the maximal supply voltage of 3.6V.Normally, it operates with a voltage of 3VV as its minimum supply voltage.There are 208 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. This frequency can be achieved at 125MHz.Operating temperatures should be higher than 0°C.A temperature less than 85°Cshould be used for operation.The logic block consists of 32 l logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.Types of programmable logic are divided into EE PLD.
EPM3512AFI256-10N Features
FBGA package
208 I/Os
256 pin count
256 pins
32 logic blocks (LABs)
EPM3512AFI256-10N Applications
There are a lot of Altera EPM3512AFI256-10N CPLDs applications.
- I/O expansion
- POWER-SAVING MODES
- Synchronous or asynchronous mode
- I/O PORTS (MCU MODULE)
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Address decoding
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Custom shift registers
- Field programmable gate
- Wide Vin Industrial low power SMPS
