EPM3512AQI208-10N
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 208 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 172 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 172 |
| Number of Logic Blocks (LABs) | 32 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 3.4mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 208 |
| Packaging | Bulk |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
EPM3512AQI208-10N Overview
512macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is contained in package [0].There are 172 I/Os on the board.Devices are programmed with terminations of [0].There is a QUADterminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.Bulkshould be used to package the chip.Chips are programmed with 208 pins.Additionally, this device is capable of displaying [0].It is possible to construct digital circuits using 10000gates, which are devices that serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.This board has 208 pins.In this case, the maximum supply voltage is 3.6V.The minimal supply voltage is 3V.There are 172 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is possible to achieve a frequency of 125MHz.There should be a temperature above -40°Cat the time of operation.It is recommended that the operating temperature be below 85°C.In total, it contains 32 logic blocks (LABs).It is recommended that the maximal frequency be lower than 116.3MHz.A programmable logic type can be categorized as EE PLD.
EPM3512AQI208-10N Features
PQFP package
172 I/Os
208 pin count
208 pins
32 logic blocks (LABs)
EPM3512AQI208-10N Applications
There are a lot of Altera EPM3512AQI208-10N CPLDs applications.
- Boolean function generators
- STANDARD SERIAL INTERFACE UART
- Configurable Addressing of I/O Boards
- D/T registers and latches
- Programmable power management
- Address decoders
- Synchronous or asynchronous mode
- Interface bridging
- ToR/Aggregation/Core Switch and Router
- Multiple DIP Switch Replacement
