EPM570F100I5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 201.1MHz |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 76 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.7mm |
| Length | 11mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570F100I5N Overview
There are 440 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).A FBGA package contains the item.As you can see, this device has 76 I/O ports programmed into it.It is programmed that device terminations will be 100 .There is a BOTTOMterminal position on the electrical part in question.A voltage of 2.5Vprovides power to the device.This part is included in Programmable Logic Devices.It is equipped with 100 pin count.This device is also capable of displaying [0].High efficiency requires a voltage supply of [0].For storing data, it is recommended to use [0].The electronic part is mounted by Surface Mount.A total of 100pins are provided on this board.A maximum supply voltage of 3.6Vis used in its operation.It is powered by 2.375Vas its minimum supply voltage.A total of 76programmable I/Os are available.The frequency that can be achieved is 201.1MHz.Operating temperatures should be higher than -40°C.A temperature below 100°Cshould be used as the operating temperature.The system consists of 57 logic blocks (LABs).A fundamental building block consists of 570logic elements/cells.It is recommended that the maximum frequency be less than 304MHz.Using the devices' 1kBmemory, programs and data can be stored.
EPM570F100I5N Features
FBGA package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570F100I5N Applications
There are a lot of Altera EPM570F100I5N CPLDs applications.
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Bootloaders for FPGAs
- Programmable polarity
- INTERRUPT SYSTEM
- DDC INTERFACE
- Field programmable gate
- USB Bus
- Dedicated input registers
- Preset swapping
- Handheld digital devices
