EPM570F256C3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 3.01205GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 160 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 5.4 ns |
| Turn On Delay Time | 5.4 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 160 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 3 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570F256C3 Overview
440 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is part of the FBGA package.There are 160 I/Os programmed in it.256terminations are programmed into the device.The terminal position of this electrical component is BOTTOM.A voltage of 2.5Vprovides power to the device.It is a part of family [0].It is recommended that the chip be packaged by Bulk.The chip is programmed with 256 pins.The supply voltage should be maintained at 3.3V for high efficiency.In general, it is recommended to store data in [0].A Surface Mountis mounted on this electronic component.There are 256 pins embedded in the device.It operates at a maximum supply voltage of 3.6V volts.The device is designed to operate with a minimal supply voltage of 2.375VV.In total, there are 160programmable I/Os.This frequency is 3.01205GHz.In order to operate properly, the operating temperature should be higher than 0°C.It is recommended that the operating temperature be below 85°C.There are 57 logic blocks (LABs) in its basic building block.An elementary building block consists of 570logic elements/cells.It is recommended that the maximum frequency is less than 0.Using the devices' 1kBmemory, programs and data can be stored.
EPM570F256C3 Features
FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570F256C3 Applications
There are a lot of Altera EPM570F256C3 CPLDs applications.
- Programmable power management
- Bootloaders for FPGAs
- Power Meter SMPS
- State machine design
- Handheld digital devices
- Digital multiplexers
- Code converters
- Cross-Matrix Switch
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- White goods (Washing, Cold, Aircon ,...)
