EPM570F256C4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 160 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 160 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570F256C4 Overview
This network has 440macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).You can find it in package [0].As you can see, this device has 160 I/O ports programmed into it.256terminations have been programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is supplied by a voltage of 2.5V volts.It is a part of the family [0].The chip should be packaged by Bulk.It has 256pins programmed.The device can also be used to find [0].High efficiency requires a voltage supply of [0].It is adopted to store data in [0].The electronic part is mounted by Surface Mount.The device has a pinout of [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.The device is designed to operate with a minimal supply voltage of 2.375VV.Programmable I/Os are counted up 160.This can be achieved at a frequency of 2.3148GHz.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 85°C.57logic blocks (LABs) make up this circuit.A fundamental building block consists of 570logic elements/cells.It is recommended that the maximal frequency be less than 0.In the devices, a memory of 1kBis provided for the storage of programs and data.
EPM570F256C4 Features
FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570F256C4 Applications
There are a lot of Altera EPM570F256C4 CPLDs applications.
- State machine control
- Storage Cards and Storage Racks
- Timing control
- Portable digital devices
- Random logic replacement
- Handheld digital devices
- INTERRUPT SYSTEM
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software Configuration of Add-In Boards
- Digital multiplexers
