EPM570F256C4N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| Termination | SMD/SMT |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 247.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 160 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 160 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.8mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570F256C4N Overview
There are 440 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.FBGAis the package in which it resides.The device has 160inputs and outputs.Terminations of devices are set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 2.5V.It is a part of the family [0].Bulkshould be used to package the chip.A chip with 256pins is programmed.This device is also capable of displaying [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].Surface Mountmounts this electronic component.256pins are included in its design.A voltage of 3.6V is the maximum supply voltage for this device.It is powered by 2.375Vas its minimum supply voltage.A total of 160programmable I/Os are available.This frequency is 247.5MHz.In order to operate properly, the operating temperature should be higher than 0°C.Temperatures should not exceed 85°C.The system consists of 57 logic blocks (LABs).In order to form a fundamental building block, there are 570logic elements/cells.If the maximal frequency is less than [0], it should be lower than that.The devices embed a memory of 1kB available for storing programs and datas.
EPM570F256C4N Features
FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570F256C4N Applications
There are a lot of Altera EPM570F256C4N CPLDs applications.
- Portable digital devices
- Bootloaders for FPGAs
- Address decoding
- ToR/Aggregation/Core Switch and Router
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Multiple Clock Source Selection
- Synchronous or asynchronous mode
- PULSE WIDTH MODULATION (PWM)
- USB Bus
- PLC analog input modules
