EPM570F256C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| Termination | SMD/SMT |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 160 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 160 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570F256C5N Overview
In the mobile phone network, there are 440macro cells, which are cells with high-power antennas and towers.The product is contained in a FBGA package.As you can see, this device has 160 I/O ports programmed into it.It is programmed that device terminations will be 256 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 2.5V volts.This part is included in Programmable Logic Devices.It is packaged in the way of Bulk.In this chip, the 256pins are programmed.This device also displays [0].Optimal efficiency requires a supply voltage of [0].It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.The 256pins are designed into the board.There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.A total of 160Programmable I/Os are present.You can achieve 304MHzfrequencies.In order to operate, the temperature should be higher than 0°C.There should be a temperature below 85°Cat the time of operation.There are 57logic blocks (LABs) that make up its basic building block.In order to form a fundamental building block, there are 570 logic elements or cells.If the maximal frequency is less than [0], it should be lower than that.The devices embed a memory of 1kB available for storing programs and datas.
EPM570F256C5N Features
FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570F256C5N Applications
There are a lot of Altera EPM570F256C5N CPLDs applications.
- Software-Driven Hardware Configuration
- Custom state machines
- USB Bus
- Pattern recognition
- Voltage level translation
- Digital multiplexers
- Wide Vin Industrial low power SMPS
- I2C BUS INTERFACE
- Multiple DIP Switch Replacement
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
