EPM570F256I5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 160 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 160 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570F256I5 Overview
There are 440 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the FBGApackage, you will find it.The device is programmed with 160 I/O ports.It is programmed that device terminations will be 256 .BOTTOMis the terminal position of this electrical part.A voltage of 2.5Vprovides power to the device.This part is included in Programmable Logic Devices.It is recommended to package the chip by Bulk.256pins are programmed on the chip.If you use this device, you will also find [0].In order to maintain high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].In this case, it is mounted by Surface Mount.256pins are included in its design.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.Despite its minimal supply voltage of [0], it is capable of operating.A total of 160programmable I/Os are available.You can achieve 1.8797GHzfrequencies.Ideally, the operating temperature should be greater than -40°C.Temperatures should be lower than 100°C when operating.There are 57 logic blocks (LABs) in its basic building block.Basic building blocks have 570logic elements.It is recommended that the maximal frequency be less than 0.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM570F256I5 Features
FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570F256I5 Applications
There are a lot of Altera EPM570F256I5 CPLDs applications.
- Code converters
- Random logic replacement
- ROM patching
- Wide Vin Industrial low power SMPS
- LED Lighting systems
- Multiple DIP Switch Replacement
- Auxiliary Power Supply Isolated and Non-isolated
- Custom state machines
- Digital multiplexers
- Software-Driven Hardware Configuration
