EPM570F256I5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 201.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 160 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 160 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570F256I5N Overview
440 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.There is a FBGA package containing it.As you can see, this device has 160 I/O ports programmed into it.Devices are programmed with terminations of [0].This electrical component has a terminal position of 0.It is powered from a supply voltage of 2.5V.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Bulk.Chips are programmed with 256 pins.It is also possible to find IT CAN ALSO OPERATE AT 3.3Vwhen using this device.The supply voltage should be maintained at 3.3V for high efficiency.Data is stored using [0].The electronic component is mounted by Surface Mount.256pins are included in its design.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.A programmable I/O count of 160 has been recorded.In this case, 201.1MHzis the frequency that can be achieved.Operating temperatures should be higher than -40°C.It is recommended that the operating temperature be below 100°C.In its simplest form, it consists of 57 logic blocks (LABs).There are 570 logic elements/cells to form a fundamental building block. If the maximal frequency is less than [0], it should be lower than that.Devices contain a 1kBmemory for storing data and programs.
EPM570F256I5N Features
FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570F256I5N Applications
There are a lot of Altera EPM570F256I5N CPLDs applications.
- PLC analog input modules
- Custom state machines
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- State machine control
- Auxiliary Power Supply Isolated and Non-isolated
- Configurable Addressing of I/O Boards
- Multiple Clock Source Selection
- Bootloaders for FPGAs
- POWER-SAVING MODES
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
