EPM570GF100I5N
| Parameters | |
|---|---|
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.7mm |
| Length | 11mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 76 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
EPM570GF100I5N Overview
There are 440 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].In this case, there are 76 I/Os programmed.The termination of a device is set to [0].This electrical part is wired with a terminal position of BOTTOM.A voltage of 1.8V is used as the power supply for this device.It is a part of family [0].With 100pins programmed, the chip is ready to use.It is also characterized by IT CAN ALSO OPERATE AT 3.3V.High efficiency requires a voltage supply of [0].In general, it is recommended to store data in [0].A Surface Mountis mounted on this electronic component.A total of 100pins are provided on this board.It operates with the maximal supply voltage of 1.89V.It is powered by 1.71Vas its minimum supply voltage.There are 76 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. A frequency of 1.8797GHzcan be achieved.There should be a temperature above -40°Cat the time of operation.A temperature lower than 100°Cis recommended for operation.57logic blocks (LABs) make up this circuit.An elementary building block consists of 570logic elements/cells.Maximum frequency should be less than 304MHz.These devices are capable of storing programs and data in 1kBmemory.
EPM570GF100I5N Features
FBGA package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570GF100I5N Applications
There are a lot of Altera EPM570GF100I5N CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- Boolean function generators
- Discrete logic functions
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Software-Driven Hardware Configuration
- Code converters
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Multiple DIP Switch Replacement
- Handheld digital devices
- Power up sequencing
