EPM570GF256C4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 160 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 160 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570GF256C4 Overview
440macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is contained in package [0].As you can see, this device has 160 I/O ports programmed into it.Devices are programmed with terminations of [0].There is a BOTTOMterminal position on the electrical part in question.The device is powered by a voltage of 1.8V volts.It is a part of family [0].Package the chip by Bulk.The chip is programmed with 256 pins.It is also possible to find YESwhen using this device.The supply voltage should be maintained at 1.8V for high efficiency.In order to store data, FLASHis used.It is mounted by Surface Mount.The pins are [0].There is a maximum supply voltage of 1.89Vwhen the device is operating.Despite its minimal supply voltage of [0], it is capable of operating.Programmable I/Os are counted up 160.This frequency is 2.3148GHz.Operating temperatures should be higher than 0°C.There should be a temperature below 85°Cat the time of operation.The program consists of 57 logic blocks (LABs).The fundamental building block consists of 570logic elements/cells.It is recommended that the maximum frequency is less than 0.The devices embed a memory of 1kB available for storing programs and datas.
EPM570GF256C4 Features
FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570GF256C4 Applications
There are a lot of Altera EPM570GF256C4 CPLDs applications.
- Timing control
- Software-Driven Hardware Configuration
- ROM patching
- Portable digital devices
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Code converters
- State machine design
- Custom state machines
- Preset swapping
- I2C BUS INTERFACE
