EPM570GF256C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | unknown |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 160 |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570GF256C5N Overview
There are 440 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].The device has 160inputs and outputs.256terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 1.8V is used as the power supply for this device.There is a part in the family [0].Ideally, the chip should be packaged by Bulk.It is equipped with 256 pin count.The device can also be used to find [0].High efficiency requires a voltage supply of [0].In order to store data, FLASHis used.In this case, Surface Mountis used to mount the electronic component.There are 256 pins embedded in the device.With a maximum supply voltage of [0], it operates.It operates with the minimal supply voltage of 1.71V.This frequency is 1.8797GHz.Ideally, the operating temperature should be greater than 0°C.It is recommended that the operating temperature be below 85°C.57logic blocks (LABs) make up this circuit.A fundamental building block consists of 570logic elements/cells.The maximum frequency should not exceed 304MHz.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM570GF256C5N Features
FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570GF256C5N Applications
There are a lot of Altera EPM570GF256C5N CPLDs applications.
- Storage Cards and Storage Racks
- Software-Driven Hardware Configuration
- USB Bus
- Wide Vin Industrial low power SMPS
- Dedicated input registers
- PLC analog input modules
- Random logic replacement
- State machine design
- Custom state machines
- I/O expansion
