EPM570GT100C3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 3.01205GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 76 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 5.4 ns |
| Turn On Delay Time | 5.4 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 3 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570GT100C3 Overview
There are 440 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).TQFPis the package in which it resides.This device has 76 I/O ports programmed into it.There are 100 terminations programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 1.8V.This part is part of the family [0].The chip should be packaged by Bulk.A chip with 100pins is programmed.If you use this device, you will also find [0].High efficiency requires the supply voltage to be maintained at [0].FLASH is adopted for storing data.Surface Mountis the mounting point of this electronic part.There are 100pins on it.A maximum supply voltage of 1.89Vis used in its operation.The device is designed to operate with a minimal supply voltage of 1.71VV.There are 76 programmable I/Os in this system.The frequency that can be achieved is 3.01205GHz.It is recommended that the operating temperature exceed 0°C.A temperature below 85°Cshould be used as the operating temperature.The system consists of 57 logic blocks (LABs).There are 570 logic elements/cells to form a fundamental building block. The maximal frequency should be lower than 304MHz.The devices contain a memory of 1kBthat can be used to store programs and data.
EPM570GT100C3 Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570GT100C3 Applications
There are a lot of Altera EPM570GT100C3 CPLDs applications.
- Software-driven hardware configuration
- Bootloaders for FPGAs
- Boolean function generators
- POWER-SAVING MODES
- Software Configuration of Add-In Boards
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- STANDARD SERIAL INTERFACE UART
- Power Meter SMPS
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Interface bridging
