EPM570GT100C4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 76 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570GT100C4 Overview
In the mobile phone network, there are 440macro cells, which are cells with high-power antennas and towers.There is a TQFP package containing it.The device is programmed with 76 I/Os.The termination of a device is set to [0].This electrical component has a terminal position of 0.Power is provided by a supply voltage of 1.8V volts.It is included in Programmable Logic Devices.The chip should be packaged by Bulk.It is programmed with 100 pins.It is also characterized by YES.For high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, it is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 1.89V when the maximum supply voltage is applied.A minimum supply voltage of 1.71V is required for it to operate.A programmable I/O count of 76 has been recorded.A frequency of 2.3148GHzcan be achieved.Operating temperatures should be higher than 0°C.A temperature below 85°Cshould be used as the operating temperature.There are 57logic blocks (LABs) that make up its basic building block.Fundamental building blocks consist of 570logic elements/cells.It is recommended that the maximal frequency be less than 0.These devices are capable of storing programs and data in 1kBmemory.
EPM570GT100C4 Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570GT100C4 Applications
There are a lot of Altera EPM570GT100C4 CPLDs applications.
- Preset swapping
- Bootloaders for FPGAs
- Handheld digital devices
- White goods (Washing, Cold, Aircon ,...)
- Field programmable gate
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Parity generators
- Auxiliary Power Supply Isolated and Non-isolated
- Random logic replacement
- ON-CHIP OSCILLATOR CIRCUIT
