EPM570GT100C5
| Parameters | |
|---|---|
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 1.8V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 76 |
| Nominal Supply Current | 40mA |
EPM570GT100C5 Overview
There are 440 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the TQFPpackage, you will find it.It is programmed with 76 I/Os.The device is programmed with 100 terminations.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is provided by a supply voltage of 1.8V volts.It belongs to the family [0].Bulkshould be used to package the chip.100pins are programmed on the chip.Additionally, this device is capable of displaying [0].High efficiency requires a voltage supply of [0].It is recommended to store data in [0].The electronic component is mounted by Surface Mount.There are 100pins on it.In this case, the maximum supply voltage is 1.89V.It operates with the minimal supply voltage of 1.71V.Currently, there are 76 Programmable I/Os available.There is 1.8797GHz frequency that can be achieved.It is recommended that the operating temperature be greater than 0°C.Temperatures should not exceed 85°C.There are 57 logic blocks (LABs) in its basic building block.A fundamental building block consists of 570logic elements/cells.It is recommended that the maximum frequency is less than 0.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM570GT100C5 Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570GT100C5 Applications
There are a lot of Altera EPM570GT100C5 CPLDs applications.
- Reset swapping
- ROM patching
- High speed graphics processing
- Digital multiplexers
- Handheld digital devices
- PULSE WIDTH MODULATION (PWM)
- ON-CHIP OSCILLATOR CIRCUIT
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Battery operated portable devices
- Multiple DIP Switch Replacement
