EPM570GT100C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 76 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570GT100C5N Overview
There are 440 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The product is contained in a TQFP package.The device has 76inputs and outputs.The termination of a device is set to [0].The terminal position of this electrical component is QUAD.The power source is powered by 1.8Vvolts.There is a part included in Programmable Logic Devices.Bulkshould be used for packaging the chip.There are 100 pins on the chip.If you use this device, you will also find [0].High efficiency requires the supply voltage to be maintained at [0].In this case, FLASHwill be used to store the data.A Surface Mountis mounted on this electronic component.There are 100pins on it.It operates with the maximal supply voltage of 1.89V.Initially, it requires a voltage of 1.71Vas the minimum supply voltage.There are a total of 76 Programmable I/Os.It is possible to achieve a frequency of 304MHz.The operating temperature should be higher than 0°C.A temperature lower than 85°Cis recommended for operation.Its basic building block is composed of 57 logic blocks (LABs).In order to form a fundamental building block, there are 570 logic elements or cells.It is recommended that the maximum frequency is less than 0.These devices are capable of storing programs and data in 1kBmemory.
EPM570GT100C5N Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570GT100C5N Applications
There are a lot of Altera EPM570GT100C5N CPLDs applications.
- Pattern recognition
- High speed graphics processing
- Software Configuration of Add-In Boards
- ON-CHIP OSCILLATOR CIRCUIT
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Dedicated input registers
- DDC INTERFACE
- Synchronous or asynchronous mode
- Power up sequencing
- Boolean function generators
