EPM570GT100I5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 1.8V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 76 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM570GT100I5 Overview
There are 440 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].As a result, it has 76 I/O ports programmed.Devices are programmed with terminations of [0].Its terminal position is QUAD.The device is powered by a voltage of 1.8V volts.This part is included in Programmable Logic Devices.Chips are programmed with 100 pins.If this device is used, you will also be able to find [0].It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.In this case, FLASHwill be used to store the data.Surface Mountis the mounting point of this electronic part.A total of 100pins are provided on this board.This device operates at a voltage of 1.89V when the maximum supply voltage is applied.In order for it to operate, a supply voltage of 1.71Vis required.A total of 76programmable I/Os are available.In this case, 1.8797GHzis the frequency that can be achieved.It is recommended that the operating temperature be higher than -40°C.Temperatures should be lower than 100°C when operating.In total, it contains 57 logic blocks (LABs).The fundamental building block consists of 570logic elements/cells.It should be below 304MHzat the maximal frequency.The devices contain a memory of 1kBfor storing programs and data.
EPM570GT100I5 Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570GT100I5 Applications
There are a lot of Altera EPM570GT100I5 CPLDs applications.
- Page register
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Portable digital devices
- Timing control
- Boolean function generators
- Voltage level translation
- STANDARD SERIAL INTERFACE UART
- ON-CHIP OSCILLATOR CIRCUIT
- Random logic replacement
- Configurable Addressing of I/O Boards
