EPM570GT100I5N
| Parameters | |
|---|---|
| Number of I/O | 76 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
EPM570GT100I5N Overview
The mobile phone network has 440 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).In the TQFPpackage, you will find it.As you can see, this device has 76 I/O ports programmed into it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 1.8V volts.The part is included in Programmable Logic Devices.There are 100 pins on the chip.The device can also be used to find [0].High efficiency requires a voltage supply of [0].It is adopted to store data in [0].The electronic component is mounted by Surface Mount.The device has a pinout of [0].There is a maximum supply voltage of 1.89V.With a minimal supply voltage of [0], it operates.Currently, there are 76 Programmable I/Os available.This frequency is 1.8797GHz.In order to operate properly, the operating temperature should be higher than -40°C.It is recommended that the operating temperature be lower than 100°C.57logic blocks (LABs) make up this circuit.The fundamental building block consists of 570logic elements/cells.It is recommended that the maximum frequency is less than 0.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM570GT100I5N Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570GT100I5N Applications
There are a lot of Altera EPM570GT100I5N CPLDs applications.
- I/O expansion
- Preset swapping
- State machine control
- Code converters
- Configurable Addressing of I/O Boards
- Reset swapping
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Address decoding
