EPM570GT144C3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 3.01205GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 116 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 5.4 ns |
| Turn On Delay Time | 5.4 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 3 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570GT144C3 Overview
In the mobile phone network, there are 440macro cells, which are cells with high-power antennas and towers.In the TQFPpackage, you will find it.As you can see, this device has 116 I/O ports programmed into it.It is programmed that device terminations will be 144 .This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power source is powered by 1.8Vvolts.It is a part of family [0].It is recommended to package the chip by Bulk.A chip with 144pins is programmed.It is also characterized by YES.High efficiency requires the supply voltage to be maintained at [0].It is recommended that data be stored in [0].This device is mounted by Surface Mount.The device has a pinout of [0].It operates at a maximum supply voltage of 1.89V volts.With a minimal supply voltage of [0], it operates.In total, there are 116programmable I/Os.This frequency is 3.01205GHz.In order to operate, the temperature should be higher than 0°C.A temperature below 85°Cshould be used as the operating temperature.The logic block consists of 57 l logic blocks (LABs).In order to form a fundamental building block, there are 570 logic elements or cells.It is recommended that the maximum frequency is less than 0.It is possible to store data and programs in the devices' 1kBmemory.
EPM570GT144C3 Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570GT144C3 Applications
There are a lot of Altera EPM570GT144C3 CPLDs applications.
- Multiple DIP Switch Replacement
- I/O expansion
- Portable digital devices
- Power automation
- Complex programmable logic devices
- Power Meter SMPS
- Storage Cards and Storage Racks
- Interface bridging
- POWER-SAVING MODES
- Digital systems
