banner_page

EPM570GT144C4

0.5mm PMIC 144 Pin 2.3148GHz 1.8V TQFP


  • Manufacturer: Altera
  • Nocochips NO: 2936-EPM570GT144C4
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 572
  • Description: 0.5mm PMIC 144 Pin 2.3148GHz 1.8V TQFP (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Package / Case TQFP
Number of Pins 144
Packaging Bulk
Published 2003
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 144
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 85°C
Min Operating Temperature 0°C
Additional Feature YES
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 220
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Frequency 2.3148GHz
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 144
Qualification Status Not Qualified
Operating Supply Voltage 1.8V
Temperature Grade COMMERCIAL EXTENDED
Max Supply Voltage 1.89V
Min Supply Voltage 1.71V
Memory Size 1kB
Operating Supply Current 40mA
Number of I/O 116
Nominal Supply Current 40mA
Memory Type FLASH
Propagation Delay 7 ns
Turn On Delay Time 7 ns
Frequency (Max) 304MHz
Number of Logic Elements/Cells 570
Number of Programmable I/O 116
Number of Logic Blocks (LABs) 57
Speed Grade 4
Output Function MACROCELL
Number of Macro Cells 440
JTAG BST YES
In-System Programmable YES
Height Seated (Max) 1.6mm
Length 20mm
Width 20mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

EPM570GT144C4 Overview


A mobile phone network consists of 440macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is packaged with TQFP.The device is programmed with 116 I/O ports.Terminations of devices are set to [0].This electrical component has a terminal position of 0.The power supply voltage is 1.8V.The part belongs to Programmable Logic Devices family.As a result, it is packaged as Bulk.Chips are programmed with 144 pins.If you use this device, you will also find [0].Optimal efficiency requires a supply voltage of [0].For data storage, FLASHis adopted.The electronic part is mounted by Surface Mount.The 144pins are designed into the board.A maximum voltage of 1.89Vis required for operation.The minimal supply voltage is 1.71V.Programmable I/Os are counted up 116.A frequency of 2.3148GHzcan be achieved.Operating temperatures should be higher than 0°C.Temperatures should not exceed 85°C.The program consists of 57 logic blocks (LABs).Basic building blocks have 570logic elements.It is recommended that the maximum frequency is less than 0.In the devices, a memory of 1kBis provided for the storage of programs and data.

EPM570GT144C4 Features


TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)

EPM570GT144C4 Applications


There are a lot of Altera EPM570GT144C4 CPLDs applications.

  • Power up sequencing
  • Dedicated input registers
  • Synchronous or asynchronous mode
  • Timing control
  • Configurable Addressing of I/O Boards
  • Protection relays
  • ANALOG-TO-DIGITAL CONVERTOR (ADC)
  • Voltage level translation
  • POWER-SAVING MODES
  • PULSE WIDTH MODULATION (PWM)

Write a review

Note: HTML is not translated!
    Bad           Good