EPM570GT144C4N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 116 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570GT144C4N Overview
There are 440 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.A TQFP package contains the item.As you can see, this device has 116 I/O ports programmed into it.144terminations are programmed into the device.Its terminal position is QUAD.The power source is powered by 1.8Vvolts.The part belongs to Programmable Logic Devices family.The chip should be packaged by Bulk.It is programmed with 144 pins.When using this device, IT CAN ALSO OPERATE AT 3.3Vcan also be found.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].In this case, it is mounted by Surface Mount.The device has a pinout of [0].It operates at a maximum supply voltage of 1.89V volts.A minimum supply voltage of 1.71V is required for this device to operate.A total of 116programmable I/Os are available.It is possible to achieve a frequency of 2.3148GHz.Operating temperatures should be higher than 0°C.It is recommended to keep the operating temperature below 85°C.The logic block consists of 57 l logic blocks (LABs).In order to form a fundamental building block, there are 570 logic elements or cells.It is recommended that the maximum frequency be less than 304MHz.The devices embed a memory of 1kB available for storing programs and datas.
EPM570GT144C4N Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570GT144C4N Applications
There are a lot of Altera EPM570GT144C4N CPLDs applications.
- Code converters
- High speed graphics processing
- I/O expansion
- Wide Vin Industrial low power SMPS
- POWER-SAVING MODES
- Interface bridging
- Configurable Addressing of I/O Boards
- Power up sequencing
- Dedicated input registers
- Discrete logic functions
