EPM570GT144C5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 116 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570GT144C5 Overview
There are 440 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the TQFPpackage, you will find it.This device has 116 I/O ports programmed into it.Devices are programmed with terminations of [0].QUADis the terminal position of this electrical part.The device is powered by a voltage of 1.8V volts.This part is in the family [0].It is recommended to package the chip by Bulk.It is equipped with 144 pin count.Additionally, this device is capable of displaying [0].The supply voltage should be maintained at 1.8V for high efficiency.It is recommended that data be stored in [0].This electronic part is mounted in the way of Surface Mount.The device has a pinout of [0].A maximum voltage of 1.89Vis required for operation.With a minimal supply voltage of [0], it operates.There are a total of 116 Programmable I/Os.There is 1.8797GHz frequency that can be achieved.It is recommended that the operating temperature be greater than 0°C.It is recommended that the operating temperature be below 85°C.57logic blocks (LABs) make up this circuit.In order to form a fundamental building block, there are 570 logic elements or cells.Maximum frequency should be less than 304MHz.Using the devices' 1kBmemory, programs and data can be stored.
EPM570GT144C5 Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570GT144C5 Applications
There are a lot of Altera EPM570GT144C5 CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- Code converters
- Multiple DIP Switch Replacement
- USB Bus
- Custom shift registers
- Custom state machines
- Power automation
- Address decoders
- Handheld digital devices
- Voltage level translation
