EPM570GT144I5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 116 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570GT144I5 Overview
Currently, there are 440 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is packaged with TQFP.As a result, it has 116 I/O ports programmed.144terminations have been programmed into the device.The terminal position of this electrical component is QUAD.The power source is powered by 1.8Vvolts.The part belongs to Programmable Logic Devices family.It is programmed with 144 pins.If you use this device, you will also find [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].Surface Mountmounts this electronic component.The pins are [0].In this case, the maximum supply voltage is 1.89V.With a minimal supply voltage of [0], it operates.A total of 116Programmable I/Os are present.There is a maximum frequency of 1.8797GHz.There should be a temperature above -40°Cat the time of operation.Ideally, the operating temperature should be below 100°C.It consists of 57 logic blocks (LABs).In order to form a fundamental building block, there are 570logic elements/cells.It should be below 304MHzat the maximal frequency.The devices embed a memory of 1kB available for storing programs and datas.
EPM570GT144I5 Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570GT144I5 Applications
There are a lot of Altera EPM570GT144I5 CPLDs applications.
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- PLC analog input modules
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Code converters
- ON-CHIP OSCILLATOR CIRCUIT
- I/O PORTS (MCU MODULE)
- Address decoders
- High speed graphics processing
- USB Bus
- Bootloaders for FPGAs
