banner_page

EPM570GT144I5N

PMIC 144 Pin 1.8797GHz 1.8V TQFP


  • Manufacturer: Altera
  • Nocochips NO: 2936-EPM570GT144I5N
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 194
  • Description: PMIC 144 Pin 1.8797GHz 1.8V TQFP (Kg)

Details

Tags

Parameters
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 100°C
Min Operating Temperature -40°C
Additional Feature IT CAN ALSO OPERATE AT 3.3V
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 1.8V
Frequency 1.8797GHz
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 144
Qualification Status Not Qualified
Operating Supply Voltage 1.8V
Max Supply Voltage 1.89V
Min Supply Voltage 1.71V
Memory Size 1kB
Operating Supply Current 40mA
Number of I/O 116
Nominal Supply Current 40mA
Memory Type FLASH
Propagation Delay 8.7 ns
Turn On Delay Time 8.7 ns
Frequency (Max) 304MHz
Number of Logic Elements/Cells 570
Number of Programmable I/O 116
Number of Logic Blocks (LABs) 57
Speed Grade 5
Output Function MACROCELL
Number of Macro Cells 440
JTAG BST YES
In-System Programmable YES
Height Seated (Max) 1.6mm
Length 20mm
Width 20mm
RoHS Status RoHS Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Package / Case TQFP
Number of Pins 144
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 144
ECCN Code EAR99

EPM570GT144I5N Overview


This network has 440macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).You can find it in package [0].In this case, there are 116 I/Os programmed.It is programmed that device terminations will be 144 .This electrical part has a terminal position of QUADand is connected to the ground.An electrical supply voltage of 1.8V is used to power it.This part is in the family [0].With 144pins programmed, the chip is ready to use.This device can also display [0].If high efficiency is desired, the supply voltage should be kept at [0].For storing data, it is recommended to use [0].The electronic part is mounted by Surface Mount.A total of 144pins are provided on this board.This device operates at a voltage of 1.89V when the maximum supply voltage is applied.A minimum supply voltage of 1.71V is required for this device to operate.There are 116 Programmable I/Os.This can be achieved at a frequency of 1.8797GHz.In order to operate properly, the operating temperature should be higher than -40°C.It is recommended that the operating temperature be lower than 100°C.In total, it contains 57 logic blocks (LABs).In order to form a fundamental building block, there are 570 logic elements or cells.There should be a lower maximum frequency than 304MHz.Using the devices' 1kBmemory, programs and data can be stored.

EPM570GT144I5N Features


TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)

EPM570GT144I5N Applications


There are a lot of Altera EPM570GT144I5N CPLDs applications.

  • ROM patching
  • STANDARD SERIAL INTERFACE UART
  • State machine control
  • SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
  • I2C BUS INTERFACE
  • Configurable Addressing of I/O Boards
  • Digital systems
  • Custom state machines
  • PLC analog input modules
  • White goods (Washing, Cold, Aircon ,...)

Write a review

Note: HTML is not translated!
    Bad           Good