EPM570T100C3N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 76 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 5.4 ns |
| Turn On Delay Time | 5.4 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 3 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570T100C3N Overview
There are 440 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The product is contained in a TQFP package.This device has 76 I/O ports programmed into it.100terminations have been programmed into the device.QUADis the terminal position of this electrical part.It is powered from a supply voltage of 2.5V.It is included in Programmable Logic Devices.It is packaged in the way of Bulk.It is equipped with 100 pin count.High efficiency requires the supply voltage to be maintained at [0].It is recommended to store data in [0].This device is mounted by Surface Mount.There are 100 pins embedded in the device.There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.In total, there are 76programmable I/Os.There is a maximum frequency of 304MHz.It is recommended that the operating temperature exceed 0°C.It is recommended that the operating temperature be below 85°C.The program consists of 57 logic blocks (LABs).There are 570 logic elements/cells on the device.The maximal frequency should be lower than 304MHz.The devices contain a memory of 1kBthat can be used to store programs and data.
EPM570T100C3N Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570T100C3N Applications
There are a lot of Altera EPM570T100C3N CPLDs applications.
- D/T registers and latches
- Voltage level translation
- Storage Cards and Storage Racks
- STANDARD SERIAL INTERFACE UART
- Field programmable gate
- Programmable polarity
- USB Bus
- Pattern recognition
- PULSE WIDTH MODULATION (PWM)
- POWER-SAVING MODES
