EPM570T100C4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 76 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
EPM570T100C4 Overview
440 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.TQFPis the package in which it resides.The device is programmed with 76 I/O ports.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 2.5V.It is included in Programmable Logic Devices.It is packaged in the way of Bulk.A chip with 100pins is programmed.When using this device, IT CAN ALSO OPERATE AT 3.3Vcan also be found.High efficiency requires the supply voltage to be maintained at [0].Data storage is performed using [0].Surface Mountis used to mount this electronic component.There are 100pins on it.This device operates at a voltage of 3.6Vas its maximum supply voltage.It is powered by 2.375Vas its minimum supply voltage.A total of 76Programmable I/Os are present.The frequency that can be achieved is 2.3148GHz.It is recommended that the operating temperature be greater than 0°C.There should be a temperature below 85°Cat the time of operation.It consists of 57 logic blocks (LABs).The fundamental building block consists of 570logic elements/cells.The maximum frequency should not exceed 304MHz.Devices contain a 1kBmemory for storing data and programs.
EPM570T100C4 Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570T100C4 Applications
There are a lot of Altera EPM570T100C4 CPLDs applications.
- I/O PORTS (MCU MODULE)
- Multiple Clock Source Selection
- Digital systems
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Custom shift registers
- Address decoders
- Field programmable gate
- Parity generators
- I2C BUS INTERFACE
- Power Meter SMPS
