EPM570T100C5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 76 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570T100C5 Overview
There are 440 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a TQFP package.This device has 76 I/O ports programmed into it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Its terminal position is QUAD.The power source is powered by 2.5Vvolts.The part belongs to Programmable Logic Devices family.Bulkshould be used to package the chip.In this chip, the 100pins are programmed.This device can also display [0].High efficiency requires the supply voltage to be maintained at [0].Data is stored using [0].In this case, it is mounted by Surface Mount.There are 100 pins on the device.There is a maximum supply voltage of 3.6V.It is powered by 2.375Vas its minimum supply voltage.There are 76 Programmable I/Os.In this case, 1.8797GHzis the frequency that can be achieved.In order to operate properly, the operating temperature should be higher than 0°C.Ideally, the operating temperature should be below 85°C.The program consists of 57 logic blocks (LABs).There are 570 logic elements/cells to form a fundamental building block. The maximum frequency should not exceed 304MHz.In the devices, there is a memory of 1kBthat can be used to store programs and data.
EPM570T100C5 Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570T100C5 Applications
There are a lot of Altera EPM570T100C5 CPLDs applications.
- Battery operated portable devices
- Multiple DIP Switch Replacement
- Programmable polarity
- I/O PORTS (MCU MODULE)
- Address decoding
- Storage Cards and Storage Racks
- Custom shift registers
- Wide Vin Industrial low power SMPS
- Boolean function generators
- Software Configuration of Add-In Boards
