EPM570T100C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 201.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 76 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570T100C5N Overview
There are 440 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the TQFPpackage, you will find it.The device is programmed with 76 I/Os.100terminations are programmed into the device.This electrical component has a terminal position of 0.It is powered by a voltage of 2.5V volts.It is included in Programmable Logic Devices.The chip should be packaged by Bulk.It is programmed with 100 pins.If you use this device, you will also find [0].Optimal efficiency requires a supply voltage of [0].For data storage, FLASHis adopted.A Surface Mountis mounted on this electronic component.It is designed with 100 pins.A voltage of 3.6V is the maximum supply voltage for this device.Initially, it requires a voltage of 2.375Vas the minimum supply voltage.There are 76 Programmable I/Os.There is 201.1MHz frequency that can be achieved.Operating temperatures should be higher than 0°C.A temperature less than 85°Cshould be used for operation.The program consists of 57 logic blocks (LABs).Basic building blocks have 570logic elements.There should be a lower maximum frequency than 304MHz.Devices contain a 1kBmemory for storing data and programs.
EPM570T100C5N Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570T100C5N Applications
There are a lot of Altera EPM570T100C5N CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Software Configuration of Add-In Boards
- State machine design
- Discrete logic functions
- Portable digital devices
- Software-Driven Hardware Configuration
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Pattern recognition
- Random logic replacement
- Configurable Addressing of I/O Boards
