EPM570T100C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2009 |
| Series | MAX® II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM570 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.5/3.32.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 76 |
| Propagation Delay | 8.7 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.5V 3.3V |
| Delay Time tpd(1) Max | 5.4ns |
| Number of Logic Elements/Blocks | 570 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM570T100C5N Overview
There are 440 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].The device has 76inputs and outputs.It is programmed to terminate devices at [0].This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 2.5V is used as the power supply for this device.It is included in Programmable Logic Devices.Package the chip by Tray.Ensure its reliability by operating at [0].It is mounted in the way of Surface Mount.In terms of FPGAs, it belongs to the MAX? II series.If you use this device, you will also find [0].The EPM570indicates that its related parts can be found.There are 570 logic elements or blocks present.The system runs on a power supply of 1.5/3.32.5/3.3V watts.Initially, the maximum supply voltage (Vsup) is 2.625V.It is important that the supply voltage (Vsup) exceeds 2.375VV.
EPM570T100C5N Features
100-TQFP package
76 I/Os
The operating temperature of 0°C~85°C TJ
1.5/3.32.5/3.3V power supplies
EPM570T100C5N Applications
There are a lot of Intel EPM570T100C5N CPLDs applications.
- Reset swapping
- Storage Cards and Storage Racks
- I/O expansion
- Portable digital devices
- LED Lighting systems
- Digital designs
- Code converters
- Timing control
- White goods (Washing, Cold, Aircon ,...)
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
