EPM570T100I5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Frequency | 1.8797GHz |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 76 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570T100I5 Overview
There are 440 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the TQFP package.The device is programmed with 76 I/O ports.100terminations have been programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 2.5V volts.There is a part in the family [0].With 100pins programmed, the chip is ready to use.This device also displays [0].In order to maintain high efficiency, the supply voltage should be maintained at [0].In order to store data, FLASHis used.Surface Mountis used to mount this electronic component.The 100pins are designed into the board.It operates at a maximum supply voltage of 3.6V volts.The minimal supply voltage is 2.375V.A programmable I/O count of 76 has been recorded.You can achieve 1.8797GHzfrequencies.Ideally, the operating temperature should be greater than -40°C.It is recommended that the operating temperature be below 100°C.There are 57 logic blocks (LABs) in its basic building block.A fundamental building block of logic consists of 570logic elements/cells.It is recommended that the maximal frequency be lower than 304MHz.These devices are capable of storing programs and data in 1kBmemory.
EPM570T100I5 Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570T100I5 Applications
There are a lot of Altera EPM570T100I5 CPLDs applications.
- Complex programmable logic devices
- LED Lighting systems
- INTERRUPT SYSTEM
- Configurable Addressing of I/O Boards
- Multiple DIP Switch Replacement
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Auxiliary Power Supply Isolated and Non-isolated
- D/T registers and latches
- Dedicated input registers
- Bootloaders for FPGAs
