EPM570T100I5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 201.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 76 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570T100I5N Overview
There are 440 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is part of the TQFP package.As a result, it has 76 I/O ports programmed.The termination of a device is set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power supply voltage is 2.5V.It is included in Programmable Logic Devices.In this chip, the 100pins are programmed.It is also possible to find IT CAN ALSO OPERATE AT 3.3Vwhen using this device.For high efficiency, the supply voltage should be maintained at [0].In this case, FLASHwill be used to store the data.The electronic component is mounted by Surface Mount.There are 100pins on it.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.With a minimal supply voltage of [0], it operates.A total of 76Programmable I/Os are present.This frequency is 201.1MHz.The operating temperature should be higher than -40°C.A temperature less than 100°Cshould be used for operation.In its simplest form, it consists of 57 logic blocks (LABs).There are 570 logic elements/cells on the device.There should be a lower maximum frequency than 304MHz.The devices embed a memory of 1kB available for storing programs and datas.
EPM570T100I5N Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570T100I5N Applications
There are a lot of Altera EPM570T100I5N CPLDs applications.
- Storage Cards and Storage Racks
- Preset swapping
- TIMERS/COUNTERS
- Custom shift registers
- Address decoders
- High speed graphics processing
- Reset swapping
- I/O expansion
- Voltage level translation
- Pattern recognition
