EPM570T100I5N
| Parameters | |
|---|---|
| Packaging | Tray |
| Published | 2014 |
| Series | MAX® II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM570 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.5/3.32.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 76 |
| Propagation Delay | 8.7 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.5V 3.3V |
| Delay Time tpd(1) Max | 5.4ns |
| Number of Logic Elements/Blocks | 570 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TJ |
EPM570T100I5N Overview
Currently, there are 440 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is packaged with 100-TQFP.It is equipped with 76I/O ports.The device is programmed with 100 terminations.There is a QUADterminal position on the electrical part in question.The device is powered by a voltage of 2.5V volts.The part belongs to Programmable Logic Devices family.Trayshould be used for packaging the chip.To ensure its reliability, the operating temperature is set to [0].There should be a Surface Mounton the chip.In FPGA terms, it is a type of MAX? IIseries FPGA.It is also possible to find IT CAN ALSO OPERATE AT 3.3Vwhen using this device.The EPM570shows its related parts.There are 570 logic elements/blocks.A power supply of 1.5/3.32.5/3.3Vvolts is required to operate this device.In this case, the maximum supply voltage (Vsup) reaches 2.625V.Voltage supply (Vsup) should be higher than 2.375V.
EPM570T100I5N Features
100-TQFP package
76 I/Os
The operating temperature of -40°C~100°C TJ
1.5/3.32.5/3.3V power supplies
EPM570T100I5N Applications
There are a lot of Intel EPM570T100I5N CPLDs applications.
- D/T registers and latches
- Wide Vin Industrial low power SMPS
- DMA control
- Interface bridging
- Digital systems
- State machine design
- Power automation
- Auxiliary Power Supply Isolated and Non-isolated
- ToR/Aggregation/Core Switch and Router
- Preset swapping
