EPM570T144C4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570T144C4 Overview
There are 440 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].It is equipped with 116I/O ports.144terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 2.5Vprovides power to the device.The part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Bulk.A chip with 144pins is programmed.This device is also capable of displaying [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].In order to store data, FLASHis used.In this case, it is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.In order for it to operate, a supply voltage of 2.375Vis required.A programmable I/O count of 116 has been recorded.There is 2.3148GHz frequency that can be achieved.It is recommended that the operating temperature be greater than 0°C.A temperature less than 85°Cshould be used for operation.The system consists of 57 logic blocks (LABs).The fundamental building block consists of 570logic elements/cells.The maximal frequency should be lower than 304MHz.It is possible to store data and programs in the devices' 1kBmemory.
EPM570T144C4 Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570T144C4 Applications
There are a lot of Altera EPM570T144C4 CPLDs applications.
- Multiple Clock Source Selection
- Software-driven hardware configuration
- I2C BUS INTERFACE
- Configurable Addressing of I/O Boards
- Complex programmable logic devices
- Digital multiplexers
- ON-CHIP OSCILLATOR CIRCUIT
- Dedicated input registers
- Field programmable gate
- Code converters
