EPM570T144C4N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570T144C4N Overview
In the mobile phone network, there are 440macro cells, which are cells with high-power antennas and towers.The item is enclosed in a TQFP package.As a result, it has 116 I/O ports programmed.The device is programmed with 144 terminations.QUADis the terminal position of this electrical part.The power source is powered by 2.5Vvolts.The part belongs to Programmable Logic Devices family.Bulkis the packaging method.A chip with 144pins is programmed.If you use this device, you will also find [0].High efficiency requires the supply voltage to be maintained at [0].For data storage, FLASHis adopted.Surface Mountis the mounting point of this electronic part.A total of 144pins are provided on this board.A voltage of 3.6V is the maximum supply voltage for this device.Despite its minimal supply voltage of [0], it is capable of operating.There are 116 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. This frequency is 2.3148GHz.The operating temperature should be higher than 0°C.A temperature less than 85°Cshould be used for operation.The system consists of 57 logic blocks (LABs).A fundamental building block consists of 570logic elements/cells.It is recommended that the maximal frequency be lower than 304MHz.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM570T144C4N Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570T144C4N Applications
There are a lot of Altera EPM570T144C4N CPLDs applications.
- Software-driven hardware configuration
- Protection relays
- DMA control
- Address decoders
- Parity generators
- Configurable Addressing of I/O Boards
- Programmable power management
- Custom shift registers
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Interface bridging
