EPM570T144I5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570T144I5 Overview
Currently, there are 440 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.TQFPis the package in which it resides.The device is programmed with 116 I/O ports.It is programmed that device terminations will be 144 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 2.5V volts.There is a part in the family [0].It has 144pins programmed.This device is also capable of displaying [0].High efficiency requires the supply voltage to be maintained at [0].Data is stored using [0].It is mounted by Surface Mount.The 144pins are designed into the board.In this case, the maximum supply voltage is 3.6V.Normally, it operates with a voltage of 2.375VV as its minimum supply voltage.Programmable I/Os are counted up 116.It is possible to achieve a frequency of 1.8797GHz.It is recommended that the operating temperature exceed -40°C.It is recommended that the operating temperature be lower than 100°C.The system consists of 57 logic blocks (LABs).In order to form a fundamental building block, there are 570 logic elements or cells.It is recommended that the maximum frequency is less than 0.These devices are capable of storing programs and data in 1kBmemory.
EPM570T144I5 Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570T144I5 Applications
There are a lot of Altera EPM570T144I5 CPLDs applications.
- ROM patching
- Random logic replacement
- ON-CHIP OSCILLATOR CIRCUIT
- Reset swapping
- LED Lighting systems
- High speed graphics processing
- Multiple DIP Switch Replacement
- Auxiliary Power Supply Isolated and Non-isolated
- Programmable power management
- Pattern recognition
