EPM570T144I5N
| Parameters | |
|---|---|
| Supply Voltage | 2.5V |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.4mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
EPM570T144I5N Overview
There are 440 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The product is contained in a TQFP package.There are 116 I/Os programmed in it.It is programmed to terminate devices at [0].Its terminal position is QUAD.It is powered by a voltage of 2.5V volts.It is included in Programmable Logic Devices.The chip is programmed with 144 pins.When using this device, IT CAN ALSO OPERATE AT 3.3Vcan also be found.For high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, it is mounted by Surface Mount.There are 144 pins on the device.There is a maximum supply voltage of 3.6V.It is powered by 2.375Vas its minimum supply voltage.A total of 116programmable I/Os are available.There is 304MHz frequency that can be achieved.It is recommended that the operating temperature exceeds -40°C.Temperatures should not exceed 100°C.The program consists of 57 logic blocks (LABs).There are 570 logic elements/cells to form a fundamental building block. It is recommended that the maximum frequency be less than 304MHz.Devices include a memory of 1kBavailable for the storage of programs and data.
EPM570T144I5N Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570T144I5N Applications
There are a lot of Altera EPM570T144I5N CPLDs applications.
- Address decoding
- PULSE WIDTH MODULATION (PWM)
- Protection relays
- Voltage level translation
- Auxiliary Power Supply Isolated and Non-isolated
- Dedicated input registers
- I/O PORTS (MCU MODULE)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Storage Cards and Storage Racks
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
