Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
TFBGA |
Number of Pins |
100 |
Published |
2003 |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
100 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
0°C |
Additional Feature |
IT CAN ALSO OPERATE AT 3.3V |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Frequency |
152MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
100 |
Operating Supply Voltage |
1.8V |
Temperature Grade |
OTHER |
Max Supply Voltage |
1.89V |
Min Supply Voltage |
1.71V |
Memory Size |
1kB |
Operating Supply Current |
40mA |
Number of I/O |
76 |
Nominal Supply Current |
40mA |
Memory Type |
FLASH |
Propagation Delay |
15.1 ns |
Turn On Delay Time |
15.1 ns |
Frequency (Max) |
152MHz |
Number of Logic Elements/Cells |
570 |
Number of Programmable I/O |
76 |
Number of Logic Blocks (LABs) |
57 |
Speed Grade |
7 |
Output Function |
MACROCELL |
Number of Macro Cells |
440 |
JTAG BST |
YES |
In-System Programmable |
YES |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
EPM570ZM100C7N Overview
This network has 440macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a TFBGA package containing it.The device is programmed with 76 I/Os.There is a 100terminations set on devices.This electrical part has a terminal position of BOTTOMand is connected to the ground.It is powered by a voltage of 1.8V volts.The part is included in Programmable Logic Devices.There are 100pins on the chip.When using this device, IT CAN ALSO OPERATE AT 3.3Vis also available.The supply voltage should be maintained at 1.8V for high efficiency.In order to store data, FLASHis used.It is mounted by Surface Mount.The device has a pinout of [0].There is a maximum supply voltage of 1.89Vwhen the device is operating.Initially, it requires a voltage of 1.71Vas the minimum supply voltage.A programmable I/O count of 76 has been recorded.A frequency of 152MHzcan be achieved.In order to operate properly, the operating temperature should be higher than 0°C.It is recommended that the operating temperature be below 85°C.There are 57logic blocks (LABs) that make up its basic building block.In order to form a fundamental building block, there are 570logic elements/cells.A maximum frequency of less than 152MHzis recommended.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM570ZM100C7N Features
TFBGA package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570ZM100C7N Applications
There are a lot of Altera EPM570ZM100C7N CPLDs applications.
- Voltage level translation
- I/O expansion
- Power Meter SMPS
- Preset swapping
- Complex programmable logic devices
- Custom state machines
- Interface bridging
- Configurable Addressing of I/O Boards
- ROM patching
- Dedicated input registers