EPM570ZM256C7N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TFBGA |
| Number of Pins | 256 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Frequency | 152MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 160 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 15.1 ns |
| Turn On Delay Time | 15.1 ns |
| Frequency (Max) | 152MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 160 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| RoHS Status | RoHS Compliant |
EPM570ZM256C7N Overview
A mobile phone network consists of 440macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).A TFBGA package contains the item.As a result, it has 160 I/O ports programmed.There are 256 terminations programmed into the device.This electrical component has a terminal position of 0.The power supply voltage is 1.8V.It is a part of family [0].It is programmed with 256 pins.This device can also display [0].For high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].The electronic part is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 1.89Vas its maximum supply voltage.It operates with the minimal supply voltage of 1.71V.A total of 160Programmable I/Os are present.There is a maximum frequency of 152MHz.Ideally, the operating temperature should be greater than 0°C.The operating temperature should be lower than 85°C.It is composed of 57 logic blocks (LABs).In order to form a fundamental building block, there are 570 logic elements or cells.A maximum frequency of less than 152MHzis recommended.Devices include a memory of 1kBavailable for the storage of programs and data.
EPM570ZM256C7N Features
TFBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570ZM256C7N Applications
There are a lot of Altera EPM570ZM256C7N CPLDs applications.
- Synchronous or asynchronous mode
- Wide Vin Industrial low power SMPS
- Parity generators
- DMA control
- POWER-SAVING MODES
- I2C BUS INTERFACE
- Storage Cards and Storage Racks
- Power up sequencing
- Multiple DIP Switch Replacement
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
