EPM7032AELC44-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
EPM7032AELC44-4 Overview
This network has 32macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).A PLCC package contains the item.As you can see, this device has 36 I/O ports programmed into it.There is a 44terminations set on devices.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 3.3Vprovides power to the device.This part is included in Programmable Logic Devices.Bulkshould be used to package the chip.There are 44 pins on the chip.A digital circuit can be constructed using 600gates.The supply voltage should be maintained at 3.3V for high efficiency.It is recommended that data be stored in [0].In this case, it is mounted by Surface Mount.A total of 44pins are provided on this board.A voltage of 3.6V is the maximum supply voltage for this device.It is powered by 3Vas its minimum supply voltage.There are 36 programmable I/Os in this system.There can be 250MHz frequency achieved.In order to operate properly, the operating temperature should be higher than 0°C.It is recommended that the operating temperature be below 70°C.The system consists of 2 logic blocks (LABs).The maximal frequency should be lower than 227.3MHz.There is a type of programmable logic called EE PLD.
EPM7032AELC44-4 Features
PLCC package
36 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM7032AELC44-4 Applications
There are a lot of Altera EPM7032AELC44-4 CPLDs applications.
- Cross-Matrix Switch
- Preset swapping
- Protection relays
- PLC analog input modules
- Power up sequencing
- Boolean function generators
- ON-CHIP OSCILLATOR CIRCUIT
- USB Bus
- D/T registers and latches
- Custom state machines
