EPM7032AELC44-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7032 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 36 |
| Propagation Delay | 4.5 ns |
| Number of Gates | 600 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 4.5ns |
| Number of Logic Elements/Blocks | 2 |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
EPM7032AELC44-4 Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 44-LCC (J-Lead) package.The device is programmed with 36 I/O ports.Terminations of devices are set to [0].This electrical part is wired with a terminal position of QUAD.The power supply voltage is 3.3V.This part is in the family [0].Package the chip by Tray.Due to its reliability, it is operated at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.As part of the MAX? 7000Aseries, it is a type of FPGA.You can find its related parts in the [0].In digital circuits, 600gates serve as building blocks.There are a total of 2 logic elements or blocks.In this case, the maximum supply voltage (Vsup) reaches 3.6V.A supply voltage (Vsup) of greater than 3V should be used.
EPM7032AELC44-4 Features
44-LCC (J-Lead) package
36 I/Os
The operating temperature of 0°C~70°C TA
EPM7032AELC44-4 Applications
There are a lot of Intel EPM7032AELC44-4 CPLDs applications.
- D/T registers and latches
- Power automation
- Bootloaders for FPGAs
- Multiple Clock Source Selection
- STANDARD SERIAL INTERFACE UART
- Cross-Matrix Switch
- Digital multiplexers
- Battery operated portable devices
- Reset swapping
- DDC INTERFACE
