EPM7032AELC44-7N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7032 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 36 |
| Clock Frequency | 138.9MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 600 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 2 |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
EPM7032AELC44-7N Overview
Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is enclosed in a 44-LCC (J-Lead) package.There are 36 I/Os programmed in it.Terminations of devices are set to [0].The terminal position of this electrical component is QUAD.There is 3.3V voltage supply for this device.It is a part of the family [0].Ideally, the chip should be packaged by Tray.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the MAX? 7000A series.The EPM7032contains its related parts.In digital circuits, 600gates serve as building blocks.There are a total of 2 logic elements or blocks.In this case, the maximum supply voltage (Vsup) is 3.6V.In order to operate properly, the supply voltage (Vsup) should be greater than 3V.Its clock frequency should not exceed 138.9MHz.
EPM7032AELC44-7N Features
44-LCC (J-Lead) package
36 I/Os
The operating temperature of 0°C~70°C TA
EPM7032AELC44-7N Applications
There are a lot of Intel EPM7032AELC44-7N CPLDs applications.
- Wide Vin Industrial low power SMPS
- D/T registers and latches
- USB Bus
- Protection relays
- Configurable Addressing of I/O Boards
- Random logic replacement
- Interface bridging
- PLC analog input modules
- Power automation
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
