EPM7032AETC44-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 151.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 950μm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7032AETC44-10N Overview
A mobile phone network consists of 32macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).You can find it in package [0].The device has 36inputs and outputs.44terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 3.3V.This part is included in Programmable Logic Devices.44pins are programmed on the chip.This device also displays [0].As a building block for digital circuits, there are 600gates.In order to maintain high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].The electronic part is mounted by Surface Mount.This board has 44 pins.It operates at a maximum supply voltage of 3.6V volts.Normally, it operates with a voltage of 3VV as its minimum supply voltage.This frequency is 151.5MHz.The operating temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.It is composed of 2 logic blocks (LABs).It is recommended that the maximal frequency be lower than 227.3MHz.It is possible to classify programmable logic as EE PLD.
EPM7032AETC44-10N Features
TQFP package
36 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM7032AETC44-10N Applications
There are a lot of Altera EPM7032AETC44-10N CPLDs applications.
- Digital multiplexers
- LED Lighting systems
- PULSE WIDTH MODULATION (PWM)
- Battery operated portable devices
- Multiple DIP Switch Replacement
- Preset swapping
- STANDARD SERIAL INTERFACE UART
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- POWER-SAVING MODES
- Random logic replacement
