EPM7032AETC44-4N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 227.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7032AETC44-4N Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.TQFPis the package in which it resides.It is programmed with 36 I/Os.There is a 44terminations set on devices.This electrical component has a terminal position of 0.The power source is powered by 3.3Vvolts.It is a part of family [0].It is equipped with 44 pin count.A digital circuit is built using 600gates.The supply voltage should be maintained at 3.3V for high efficiency.In general, it is recommended to store data in [0].This device is mounted by Surface Mount.The device has a pinout of [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.It is powered by 3Vas its minimum supply voltage.In total, there are 36programmable I/Os.There can be 227.3MHz frequency achieved.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be below 70°C.There are 2logic blocks (LABs) that make up its basic building block.It is recommended that the maximum frequency is less than 0.A programmable logic type can be categorized as EE PLD.
EPM7032AETC44-4N Features
TQFP package
36 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM7032AETC44-4N Applications
There are a lot of Altera EPM7032AETC44-4N CPLDs applications.
- Power automation
- Digital multiplexers
- White goods (Washing, Cold, Aircon ,...)
- Bootloaders for FPGAs
- DMA control
- D/T registers and latches
- High speed graphics processing
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Synchronous or asynchronous mode
- Handheld digital devices
